Home > RC Flight, YC-14 > Project YC-14 Hobby King Order

Project YC-14 Hobby King Order

September 26, 2013 Leave a comment Go to comments

It took about 3 weeks for this order to come in.

Right on time for us to try and get the plane flying by October.

You can see the list from my prev post.

So tonight I worked on disabling the 2nd ESC’s bec. I am actually going to wire it up so it feeds the 2nd reciver but using the + power and soldering a t connection to the ground.

But I could not resist testing her out. Even with just 1 prop.

Photo time.

Gotta love opening a box full of toys.

IMG_6889

So many wonderful things.

IMG_6890

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories

2S Battery Cable 6 x Parallel JST-PH Charge Lead for E-flite UMX Series 2S Lipoly

1S Battery Cable Micro JST Parallel Charge Lead (6 plugs)

IMG_6891

T2200.3S.25 – Turnigy 2200mAh 3S 25C Lipo Pack

IMG_6893

HKESC35A – H-KING 35A Fixed Wing Brushless Speed Co.. 

IMG_6894

D2830-111000 – D2830-11 1000kv Brushless Motor

IMG_6895

Micro Servos TG9e – Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Mi..

IMG_6896

Y Cables AM-3003-15 – JR Y Servo Lead 15CM Length (5pcs/bag)

45cm Ext Cables 015000009 – 45CM Servo Lead Extention (JR) with hook..

IMG_6897

We now have enough to basically get the plane flying.

IMG_6898

First order was to learn how to use the balance charger. Read over the PDF manual and asked a few questions.

– Balance charge is always better. Slower but better. Select 11.1v (3S) and 2.2Amps.

IMG_6899

My big old charger is up to the job! Have to make a field setup next.

IMG_6900

Built time. Left ESC has the BEC disabled. As I said earlier I will be running 2 receivers so the 2nd ESC will power the 2nd receiver which will control the camera and bomb/cargo drops.

IMG_6901

I used paint stir sticks and a servo mount kit to screw down the motor.

IMG_6902

Also drilled a hole 3/8 for the wires. Excuse the exposure issue.

IMG_6903

How could I resist not testing this out. BTW those are big props.

IMG_6905

On the ground I have 1″ of clearance.

IMG_6906

ESC running out the back.

IMG_6907

I made a notch for the battery pack wire and ESC control cable.

IMG_6910

Tomorrow I will glue in the servos.

IMG_6911

Still have some work to do to lock it all down in place.

IMG_6913

At least the wing can be laid down flat.

IMG_6914

I had to cut an access hole to get the rear servo wires through.

IMG_6916

Friday I will finish off a few jobs and we shall see how it all comes together.

  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s